 |
 | |  | |  |
Brother 7 Groove Pintuck Foot for the ULT, NX, Innov-ís series
The pin tuck foot, in combination with a twin needle, helps you to make perfect pin tucks as well as to sew corded pin tucks on shirts, blouses and many home decorating projects. | | Brother Embroidery Q Plus Foot
New Style Embroidery Foot for ULT , PC8500, PC8500D(Q+ FOOT) This foot has been designed for embroidering with ultra-fine threads. | | Brother Metal Open Toe Foot
This snap on Open-toe foot provides clear visibility when creating decorative and satine stitches while securely setting on the feed dogs to provide stitches consistent in length and shape. |
|
|
 | |  | |  |
Brother SA107 Walking Foot
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. | | Brother SA108 Straight Stitch foot
The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area. | | Brother SA109 Binder Foot
Binder foot (SA109) Used to attach bias tape less than 7mm (finished) in width. The design of this foot places your ready made bias tape or will fold and place precut bias strips correctly for easy sewing to the edge of a fabric. |
|
|
 | |  | |  |
Brother SA110 Cording Foot for 7mm horizontal mach.
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158 | | Brother SA114 Non-Stick Foot (horizontal bobbins)
This non-stick foot glides over difficult fabric surfaces with ease, while improving stitch quality in many problem fabrics. Some fabrics may bind under metal feet often causing problems with a consistant feed resulting in poor stitch quality. The non stick foot overcomes problems with fabric such as loop and hook tapes, leather, and vinyl. Perfect for hemming plastic tablecloths! | | Brother SA120 Gathering Foot for PS & PC series
The Gathering Foot can be used for lightly gathering fabric as well as attaching the gathered edge to a flat (ungathered) fabric, at the same time quickly and easily. The gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications. |
|
|
 | |  | |  |
Brother SA122 Non Stick Teflon Foot for vertical bobbin mach.
Non-stick foot glides over difficult fabric surfaces with ease improving stitch quality in many problem fabrics. Some fabrics may bind under metal feet often causing problems in consistant feed resulting in poor stitch quality. The non stick foot overcomes problems with fabric such as loop and hook tapes, leather, and vinyl. Similar to standard J and Clear-view feet. | | Brother SA125 1/4" Quilting Foot
For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created. | | Brother SA126 Narrow Hem Foot (7mm)
The unique design of this foot creates a flat narrow hem on lightweight fabrics. This foot looks similar to the picot foot from the top. However the groove under the foot is slightly wider and flatter to form and to create a beautiful narrow hem. Start sewing with a length of thread extended from the back. |
|
|
| |  | |  |
Brother SA127 Narrow Hem Foot (5 mm)
For narrow rolled hemming use the Narrow hemmer foot. It's unique design creates a flat narrow hem on lightweight fabrics.This foot looks similar to the picot foot from the top. However the groove under the foot is slightly wider and flatter form and to create a beautiful narrow hem. | | Brother SA128 Concealed Zipper/Fastener Foot (Snap on Foot)
Concealed Zipper/Fastener Foot (Snap on Foot). For easy installation of concealed zippers. | | Brother SA129 Clear Quilting Foot (Screw on Foot)
This foot is also called a darning foot and may be used as a free motion foot. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created. (Screw on Foot). |
|
|
 | |  | |  |
Brother SA131 Low Shank Attachment
Adaptor for low shank attachments Some screw on feet will not have adequate height to be used with some of our embroidery/sewing machine's presser bar. The adapter is used to add height to low shank screw on feet to insure proper fitment as well as pressure on the fabric. Check to make sure that you are using the correct adaptor for your machine. | | Brother SA132 Quilting Guide for Foot Holder
The adjustable guide can be used to sew parallel rows at preset even intervals. Slide straight bar into the hole of the presser foot ankle or walking foot (equipped with a mounting hole). The distance from the needle may be adjusted by sliding the guide from left to right. | | Brother SA133 Blind Stitch Foot 5 or 7mm
Adjustable guide for creating blind hems on a variety of fabrics While designed for blind stitching, the foot works well for edge stitching, lace and fabric edge joining. This is a great tool for many embellishing as well as utility uses. |
|
|
 | |  | |  |
Brother SA135 Overlock Foot V (5mm)
The Overlock Foot is used for sewing overcast seams and protect edges from fraying. Use the overcast stitches in your machine and see what a difference this foot makes in their appearance and functionality! | | Brother SA140 Walking Foot
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. | | Brother SA141 Braiding Foot up to 5mm width
The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width. |
|
|
 | |  | |  |
Brother SA142 Fringe Foot
The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch. This foot was originally designed and used to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well! | | Brother SA143 Ruffler Foot for 7mm mach.
Ruffle and pleat like a pro. Create beautiful ruffles and pleats in varying depths and fullness with this adjustable ruffler. The new Brother ruffler makes fast work of creating ruffles, evenly spaced tucks, and gathers for home dec pillows and curtains. | | Brother SA144 Clearview Foot for vertical bobbin 5mm
Clear-view foot is used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic. |
|
|
 | |  | |  |
Brother SA145 Clearview Foot for horizontal bobbin 7mm
The Clear-view foot can be used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA147 except this foot has a clear bar in front of the needle. Perfect for quilting applique'! | | Brother SA146 Open Toe for vertical bobbin 5mm
The Open Toe Foot is used with any application where extra visibility is desired. Uses include sewing where visibility is important such as seams with markings or curves, pattern markings, or applique stitching as well as for ease in embellishment. | | Brother SA147 Clear Open Toe for horizontal bobbin 7mm
This foot is used with any application where visibility of seams, appliques, or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA145 except this foot has no bar in front of the needle. |
|
|
 | |  | |  |
Brother SA150 Pearl Sequins Foot
Pearls & Sequin foot is great for embellishing with threaded beads, sequins, or rounded cords up to 4 mm in size. Simply place your embellishment choice under the foot and into the guide tunnels andstitch down to your base fabric. | | Brother SA157 5 Hole Cording Foot (up to 7mm)
Used for embellishing with 1-5 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 5 hole cording foot is fitted to our machines with 7mm feed width. | | Brother SA158 7 Hole Cording Foot (up to 7mm)
Used for embellishing with 1-7 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 7 hole cording foot is fitted to our machines with 7mm feed width. Be sure that you check that this foot is usable with your machine. |
|
|
 | |  | |  |
Brother SA160 Stitch Guide Foot
Stitch guide foot has a flange to the right of the foot with measurement markings to use as a fabric guide. This foot is a very helpful guide for use in sewing both utility and embellishing projects. | | Brother SA161 Adjustable Zipper & Piping Foot
The foot is adjustable to the distance that the zipper is from the needle, not just the needle position. Because of it's adjustability it is also often used in many home decoration projects such as sewing piping and other trims with a seam allowance tape making this foot a must for the serious seamstress. | | Brother SA164 Picot Foot (7mm)
Picot foot This foot looks similar to the narrow hemmer feet, but is designed to create a shell-look edge on lightweight fabrics. |
|
|
 | |  | |  |
Brother SA165 Quilting / Free Motion Foot
Clear Quilting Foot This foot is also called a darning foot and may be used as a free motion foot. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created. | | Brother SA166 Walking Foot
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. | | Brother SA167 Straight Stitch Foot
Straight Stitch Foot for PC, PS, NX, ULT, CS, SE270D, NV500D The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. |
|
|
 | |  | |  |
Brother SA170 Spring Action Guide Foot (PQ Series) 3PC 2MM,5MM,8MM
These feet are inspired by the industrial compensating feet. | | Brother SA171 Gathering Foot for PQ Series Sewing Machines
The Gathering Foot can be used for lightly gathering fabric as well as attaching the gathered edge to a flat (ungathered) fabric, at the same time quickly and easily.The gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications. | | Brother SA172 Very Narrow Foot for PQ Series Sewing Machines
It's that foot we wish we had for those tight corners, working up against a ridge, or other similar situations. This foot is a must have for applying piping or zipper insertion for your home decor, craft and fashion sewing projects. |
|
|
 | |  | |  |
Brother SA173 Heavy Weight Foot for PQ Series Sewing Machines
The Heavy Weight presser foot has a larger "foot print" that assures better contact of the fabric to the feed dogs. | | Brother SA174 7 Groove Pin Tuck Foot
The pin tuck foot, in combination with a twin needle, helps you to make perfect pin tucks as well as to sew corded pin tucks on shirts, blouses and many home decorating projects. This accessory comes complete with bobbin cover with cord guide which fits many of the Pacesetter models. | | Brother SA176 Zig Zag Foot with Ankle
No more getting stuck at a rise or uneven stitches on the down side! This is also a great item to have on hand as a replacement for a lost or damaged ankle. |
|
|
 | |  | |  |
Brother SA178 Side Cutter for 5mm Machines PE300/400/500D/270D
With our newly redesigned side cutter attachment, beautifully finished seams are just a foot away. The new side cutter attachment, SA177, allows you to use even the wider over-casting stitches on your machine and creates the perfectly cut edge of a serger. | | Brother SA184 Edge Joining Foot
The SA184 Edge Joining Foot is perfect for precise and easy joining of fabrics, even sheers and difficult fabrics. Use this foot for lining up and sewing two fabrics together to create the classic Fagoting technique or can be used to line up and sew edgings such as lace to the edge of another fabric. | | Brother SA185 1/4 Piecing Foot Guide
The SA184 Edge Joining Foot is perfect for precise and easy joining of fabrics, even sheers and difficult fabrics. Use this foot for lining up and sewing two fabrics together to create the classic Fagoting technique or can be used to line up and sew edgings such as lace to the edge of another fabric. Great for creating garment, home decorating as well as many heirloom finishes. |
|
|
 | |  | |  |
Brother SA188 Open Toe Walking Foot
Now you can use your walking foot for more than just straight sewing. The open-toe foot allows you to use multiple needle positions, zig-zag stitches and some decorative stitches. | | Brother Seam Guide (fits most)
This adjustable seam guide attaches to your machine with a thumbscrew making sewing at a particular distance from the edge of your fabric easy and accurate. | | Brother-SA187 Open-toe Quilting Foot
Spring-action with an open toe viewing area that makes following a pattern easy, while closed area rests securely on fabric when quilting or doing free-motion embroidery. |
|
|
| |  |
| | SA169 Walking Foot for Vertical Bobbin Machines
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. |
|
Sewing Brands
